Vacuum Forming Machine for Inner Door Panel

• Customization: Available
• Certification: ISO
• Column number: Unknown
• Molding Method: Thermo Forming
• Automatic Grade: Automatic
• Transport Package: Wharf Container
• Trademark: KCM
• Origin: Chuzhou, Anhui, China

Product Description

Components:

1. Pre-heating;
2. Heating Part;
3. Forming Machine;
4. Spiked Chain Transmission System;
5. Unloading Part with Auto Picking and Slowdown;
6. Hydraulic Pressure System;
7. Pneumatic System;
8. Vacuum System;
9. Cooling System;
10. Mold Heating System;
11. Electrical Control System;
12. Trimming Machine(For finishing to cut off peripheral sides of inner line);

Process:

1. Put the original board on the workbench of the loading station in preset order manually;
2. The board is moved by workbench to the board loading position;
3. Automatically pick up the board and move the board to the Transmission part;
4. The board is sent in the Heating Station on time;
5. The heated plate is shifted to the Vacuum Forming Station;
6. The cylinder pushes the medium mold holder downward and presses the board;
7. Blow the air to the board;
8. The forming die moves upward to the right position;
9. The board is vacuumed and sucked to the forming die;
10. The upper mold holder moves down to the right position and presses the board;
11. The cooling device cools down the formed piece;
12. Demoulding;
13. The upper mold holder is up;
14. The forming die goes down;
15. The medium mold holder moves upward;
16. The formed piece is positioned to the unloading station;
17. Unload the piece;
18. Take the piece out in manual.

Specifications:
Forming Area Dimensions: 1900 X 900mm;
Maximum Forming Depth: 650mm;
Maximum Power Consumption: 400KW(3-phase 380V);
Maximum Heating Power: About 160KW(3-phase);
Cyclic Process Time: 50s/set, based on the thickness of 3.5mm ABS sheet;
                40s/set, based on the thickness of 2.0mm ABS sheet;
Compressed Air Source: 1½" (0.5-0.65Mpa)
Tap water: 2T/H
Sheet Thickness: 3.0-5.0mm
Material: ABS, PS or HIPS