Metal Forming Line for Refrigerator Door W/O Handle
1. Main Technical Data
1) Material: 0.5mm as detection standard
2) It is suit for below three material:
a. Uncoated Cold Rolled Steel: Thickness 0.5-0.6mm
b. Galvanized Steel with a polymer coating: Thickness 0.5-0.6mm
c. Stainless steel: Thickness 0.5-0.6mm
3) Constant Material.
2. Product:
1) Dimension: Width 490-600mm, Length:380-1750mm (With End Flanging Product)
2) Working Mode: In the length direction, it adopts clamp to carry the metal sheet finishing punching.
3) Cycle time: less than 30s/p
4) Size of equipment (reference) : 25500*5000mm
5) The Equipment Height: 1000mm over ground
4. Total Electric Capacity: About 110 KVA (380V 50HZ), It depends on the final design.
5. Air: 0.6-0.8 MPa.
Single Station Vacuum Thermoforming machine/ Doube station Vacuum Thermoforming machine/ Multi Station Vacuum Thermoforming machine/ Plastic thermoforming machine/8 station cabinet straight forming machine/cabinet PU foaming fixture/ Multi station Cabinet foaming line/7 station door foaming rotary drum/ 8 Station door foaming rotary drum/ ground rail foaming carousel line/ Independent foaming fixture/metal forming machine/ U shell forming line/ side panel forming line/ rear panel forming line/ door shell forming line/assembly conveyor line/conveyor assembly line
Audited Supplier 
){kind=link}